Files
etcd/raft/testdata/confchange_v2_add_single_explicit.txt
Nathan VanBenschoten e51c697ec6 raft: disable XXX_NoUnkeyedLiteral, XXX_unrecognized, and XXX_sizecache fields in protos
This commit removes the `XXX_NoUnkeyedLiteral`, `XXX_unrecognized`, and
`XXX_sizecache` auto-generated fields from generated protobuf structs in
the raft package. This was done for all of the same reasons CockroachDB
removed the generation of these fields in https://github.com/cockroachdb/cockroach/pull/38404.
They come with very limited advantages but moderate disadvantages.

`XXX_NoUnkeyedLiteral` and `XXX_sizecache` were only enabled recently in
cc7b4fa, and this appears to have been unintentional. Meanwhile,
`XXX_unrecognized` has been around for longer and has arguably more
reason to stay because it can assist with forwards compatibility.
However, any real mixed-version upgrade story for this package is mostly
untold at this point, and keeping this field seems just as likely to
cause unexpected bugs (e.g. a field was propagated but not updated
correctly when passed through an old version) as it seems to fix real
issues, so it also doesn't warrant its cost.

This reduces the in-memory representation size of all Raft protos.
Notably, it reduces the memory size of an `Entry` proto from *80 bytes*
to *48 bytes* and the memory size of a `Message` proto from *392 bytes*
to *264 bytes*. Both of these structs are used frequently, and often in
slices, where this wasted space really starts to add up.

This was motivated by a regression in microbenchmarks in CockroachDB due
to cc7b4fa, which was caught in https://github.com/cockroachdb/cockroach/issues/62212.
2021-03-20 03:24:18 -04:00

207 lines
6.8 KiB
Plaintext

# Run a V2 membership change that adds a single voter but explicitly asks for the
# use of joint consensus, including wanting to transition out of the joint config
# manually.
# Bootstrap n1.
add-nodes 1 voters=(1) index=2
----
INFO 1 switched to configuration voters=(1)
INFO 1 became follower at term 0
INFO newRaft 1 [peers: [1], term: 0, commit: 2, applied: 2, lastindex: 2, lastterm: 1]
campaign 1
----
INFO 1 is starting a new election at term 0
INFO 1 became candidate at term 1
INFO 1 received MsgVoteResp from 1 at term 1
INFO 1 became leader at term 1
# Add v2 with an explicit transition.
propose-conf-change 1 transition=explicit
v2
----
ok
# Pull n2 out of thin air.
add-nodes 1
----
INFO 2 switched to configuration voters=()
INFO 2 became follower at term 0
INFO newRaft 2 [peers: [], term: 0, commit: 0, applied: 0, lastindex: 0, lastterm: 0]
# n1 commits the conf change using itself as commit quorum, then starts catching up n2.
# Everyone remains in the joint config. Note that the snapshot below has AutoLeave unset.
stabilize 1 2
----
> 1 handling Ready
Ready MustSync=true:
Lead:1 State:StateLeader
HardState Term:1 Vote:1 Commit:4
Entries:
1/3 EntryNormal ""
1/4 EntryConfChangeV2 v2
CommittedEntries:
1/3 EntryNormal ""
1/4 EntryConfChangeV2 v2
INFO 1 switched to configuration voters=(1 2)&&(1)
> 1 handling Ready
Ready MustSync=false:
Messages:
1->2 MsgApp Term:1 Log:1/3 Commit:4 Entries:[1/4 EntryConfChangeV2 v2]
> 2 receiving messages
1->2 MsgApp Term:1 Log:1/3 Commit:4 Entries:[1/4 EntryConfChangeV2 v2]
INFO 2 [term: 0] received a MsgApp message with higher term from 1 [term: 1]
INFO 2 became follower at term 1
DEBUG 2 [logterm: 0, index: 3] rejected MsgApp [logterm: 1, index: 3] from 1
> 2 handling Ready
Ready MustSync=true:
Lead:1 State:StateFollower
HardState Term:1 Commit:0
Messages:
2->1 MsgAppResp Term:1 Log:0/3 Rejected (Hint: 0)
> 1 receiving messages
2->1 MsgAppResp Term:1 Log:0/3 Rejected (Hint: 0)
DEBUG 1 received MsgAppResp(rejected, hint: (index 0, term 0)) from 2 for index 3
DEBUG 1 decreased progress of 2 to [StateProbe match=0 next=1]
DEBUG 1 [firstindex: 3, commit: 4] sent snapshot[index: 4, term: 1] to 2 [StateProbe match=0 next=1]
DEBUG 1 paused sending replication messages to 2 [StateSnapshot match=0 next=1 paused pendingSnap=4]
> 1 handling Ready
Ready MustSync=false:
Messages:
1->2 MsgSnap Term:1 Log:0/0 Snapshot: Index:4 Term:1 ConfState:Voters:[1 2] VotersOutgoing:[1] Learners:[] LearnersNext:[] AutoLeave:false
> 2 receiving messages
1->2 MsgSnap Term:1 Log:0/0 Snapshot: Index:4 Term:1 ConfState:Voters:[1 2] VotersOutgoing:[1] Learners:[] LearnersNext:[] AutoLeave:false
INFO log [committed=0, applied=0, unstable.offset=1, len(unstable.Entries)=0] starts to restore snapshot [index: 4, term: 1]
INFO 2 switched to configuration voters=(1 2)&&(1)
INFO 2 [commit: 4, lastindex: 4, lastterm: 1] restored snapshot [index: 4, term: 1]
INFO 2 [commit: 4] restored snapshot [index: 4, term: 1]
> 2 handling Ready
Ready MustSync=false:
HardState Term:1 Commit:4
Snapshot Index:4 Term:1 ConfState:Voters:[1 2] VotersOutgoing:[1] Learners:[] LearnersNext:[] AutoLeave:false
Messages:
2->1 MsgAppResp Term:1 Log:0/4
> 1 receiving messages
2->1 MsgAppResp Term:1 Log:0/4
DEBUG 1 recovered from needing snapshot, resumed sending replication messages to 2 [StateSnapshot match=4 next=5 paused pendingSnap=4]
> 1 handling Ready
Ready MustSync=false:
Messages:
1->2 MsgApp Term:1 Log:1/4 Commit:4
> 2 receiving messages
1->2 MsgApp Term:1 Log:1/4 Commit:4
> 2 handling Ready
Ready MustSync=false:
Messages:
2->1 MsgAppResp Term:1 Log:0/4
> 1 receiving messages
2->1 MsgAppResp Term:1 Log:0/4
# Check that we're not allowed to change membership again while in the joint state.
# This leads to an empty entry being proposed instead (index 5 in the stabilize block
# below).
propose-conf-change 1
v3 v4 v5
----
INFO 1 ignoring conf change {ConfChangeTransitionAuto [{ConfChangeAddNode 3} {ConfChangeAddNode 4} {ConfChangeAddNode 5}] []} at config voters=(1 2)&&(1): must transition out of joint config first
# Propose a transition out of the joint config. We'll see this at index 6 below.
propose-conf-change 1
----
ok
# The group commits the command and everyone switches to the final config.
stabilize
----
> 1 handling Ready
Ready MustSync=true:
Entries:
1/5 EntryNormal ""
1/6 EntryConfChangeV2
Messages:
1->2 MsgApp Term:1 Log:1/4 Commit:4 Entries:[1/5 EntryNormal ""]
1->2 MsgApp Term:1 Log:1/5 Commit:4 Entries:[1/6 EntryConfChangeV2]
> 2 receiving messages
1->2 MsgApp Term:1 Log:1/4 Commit:4 Entries:[1/5 EntryNormal ""]
1->2 MsgApp Term:1 Log:1/5 Commit:4 Entries:[1/6 EntryConfChangeV2]
> 2 handling Ready
Ready MustSync=true:
Entries:
1/5 EntryNormal ""
1/6 EntryConfChangeV2
Messages:
2->1 MsgAppResp Term:1 Log:0/5
2->1 MsgAppResp Term:1 Log:0/6
> 1 receiving messages
2->1 MsgAppResp Term:1 Log:0/5
2->1 MsgAppResp Term:1 Log:0/6
> 1 handling Ready
Ready MustSync=false:
HardState Term:1 Vote:1 Commit:6
CommittedEntries:
1/5 EntryNormal ""
1/6 EntryConfChangeV2
Messages:
1->2 MsgApp Term:1 Log:1/6 Commit:5
1->2 MsgApp Term:1 Log:1/6 Commit:6
INFO 1 switched to configuration voters=(1 2)
> 2 receiving messages
1->2 MsgApp Term:1 Log:1/6 Commit:5
1->2 MsgApp Term:1 Log:1/6 Commit:6
> 2 handling Ready
Ready MustSync=false:
HardState Term:1 Commit:6
CommittedEntries:
1/5 EntryNormal ""
1/6 EntryConfChangeV2
Messages:
2->1 MsgAppResp Term:1 Log:0/6
2->1 MsgAppResp Term:1 Log:0/6
INFO 2 switched to configuration voters=(1 2)
> 1 receiving messages
2->1 MsgAppResp Term:1 Log:0/6
2->1 MsgAppResp Term:1 Log:0/6
# Check that trying to transition out again won't do anything.
propose-conf-change 1
----
INFO 1 ignoring conf change {ConfChangeTransitionAuto [] []} at config voters=(1 2): not in joint state; refusing empty conf change
# Finishes work for the empty entry we just proposed.
stabilize
----
> 1 handling Ready
Ready MustSync=true:
Entries:
1/7 EntryNormal ""
Messages:
1->2 MsgApp Term:1 Log:1/6 Commit:6 Entries:[1/7 EntryNormal ""]
> 2 receiving messages
1->2 MsgApp Term:1 Log:1/6 Commit:6 Entries:[1/7 EntryNormal ""]
> 2 handling Ready
Ready MustSync=true:
Entries:
1/7 EntryNormal ""
Messages:
2->1 MsgAppResp Term:1 Log:0/7
> 1 receiving messages
2->1 MsgAppResp Term:1 Log:0/7
> 1 handling Ready
Ready MustSync=false:
HardState Term:1 Vote:1 Commit:7
CommittedEntries:
1/7 EntryNormal ""
Messages:
1->2 MsgApp Term:1 Log:1/7 Commit:7
> 2 receiving messages
1->2 MsgApp Term:1 Log:1/7 Commit:7
> 2 handling Ready
Ready MustSync=false:
HardState Term:1 Commit:7
CommittedEntries:
1/7 EntryNormal ""
Messages:
2->1 MsgAppResp Term:1 Log:0/7
> 1 receiving messages
2->1 MsgAppResp Term:1 Log:0/7