9e216da9ef
After go1.16, go will use module mode by default, even when the repository is checked out under GOPATH or in a one-off directory. Add go.mod, go.sum to keep this repo buildable without opting out of the module mode. > go mod init github.com/mmcgrana/gobyexample > go mod tidy > go mod vendor In module mode, the 'vendor' directory is special and its contents will be actively maintained by the go command. pygments aren't the dependency the go will know about, so it will delete the contents from vendor directory. Move it to `third_party` directory now. And, vendor the blackfriday package. Note: the tutorial contents are not affected by the change in go1.16 because all the examples in this tutorial ask users to run the go command with the explicit list of files to be compiled (e.g. `go run hello-world.go` or `go build command-line-arguments.go`). When the source list is provided, the go command does not have to compute the build list and whether it's running in GOPATH mode or module mode becomes irrelevant.
46 lines
1.9 KiB
Plaintext
46 lines
1.9 KiB
Plaintext
[user@linuxbox imx-bootlets-src-10.05.02]$ make CROSS_COMPILE=arm-none-eabi- clean
|
|
rm -rf *.sb
|
|
rm -f sd_mmc_bootstream.raw
|
|
rm -f linux_prep/board/*.o
|
|
...
|
|
Files:
|
|
rm -f power_prep.o eabi.o
|
|
Build output:
|
|
make[1]: Leaving directory `/home/...'
|
|
[user@linuxbox imx-bootlets-src-10.05.02]$ make CROSS_COMPILE=arm-none-eabi-
|
|
make[1]: Entering directory `/home/...'
|
|
...
|
|
#@echo "generating U-Boot boot stream image"
|
|
#elftosb2 -z -c ./uboot_prebuilt.db -o imx23_uboot.sb
|
|
echo "generating kernel bootstream file sd_mmc_bootstream.raw"
|
|
generating kernel bootstream file sd_mmc_bootstream.raw
|
|
#Please use cfimager to burn xxx_linux.sb. The below way will no
|
|
#work at imx28 platform.
|
|
> test
|
|
$ test
|
|
rm -f sd_mmc_bootstream.raw
|
|
[user@linuxbox imx-bootlets-src-10.05.02]$
|
|
pi@raspberrypi ~ $ sudo sh -c "echo 17 > /sys/class/gpio/export"
|
|
pi@raspberrypi ~ $ sudo sh -c "echo out > /sys/class/gpio/gpio17/direction"
|
|
pi@raspberrypi ~ $ sudo sh -c "echo 1 > /sys/class/gpio/gpio17/value"
|
|
pi@raspberrypi ~ $ sudo sh -c "echo 0 > /sys/class/gpio/gpio17/value"
|
|
pi@raspberrypi ~ $
|
|
[user@linuxbox ~]$ # copy other stuff to the SD card
|
|
root@imx233-olinuxino-micro:~# lsmod
|
|
Not tainted
|
|
[user@linuxbox ~]$ tail -n 2 /mnt/rpi/etc/inittab
|
|
#Spawn a getty on Raspberry Pi serial line
|
|
T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100
|
|
pi@raspberrypi:~/Adafruit-WebIDE$ mkdir tmp
|
|
pi@raspberrypi:~/Adafruit-WebIDE$ npm config set tmp tmp
|
|
pi@raspberrypi:~/Adafruit-WebIDE$ npm install
|
|
pi@raspberrypi ~/Adafruit-WebIDE $ ifconfig eth0
|
|
eth0 Link encap:Ethernet HWaddr b5:33:ff:33:ee:aq
|
|
inet addr:10.42.0.60 Bcast:10.42.0.255 Mask:255.255.255.0
|
|
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
|
|
RX packets:21867 errors:0 dropped:0 overruns:0 frame:0
|
|
TX packets:8684 errors:0 dropped:0 overruns:0 carrier:0
|
|
collisions:0 txqueuelen:1000
|
|
RX bytes:27338495 (26.0 MiB) TX bytes:1268356 (1.2 MiB)
|
|
|